Athena IPM is a complete pest management formula that kills many soft-bodied insects and mildew on contact. When used as directed Athena IPM penetrates plant crevices and leaf surfaces where unwanted biotic diseases seek to colonize.
Complete powdery mildew management: Control, Killer & Cure
NO artificial pesticides or fungicides
Derived from inputs grown in the USA
Can be used from seedling to harvest
EPA 25(b) Exempt product with minimal risk ingredients
Preventative |
Application Method:
Spray with lights off or in early morning sun. Start with a lower dose then increase if the problem persists. Stop all treatments 2 full weeks prior to harvest. Saturate growing media with water before spraying to minimize plant stress.
Vegetative up to end of Flower week 3:
Mix 158-238 mL Athena IPM per 10L of water. 2-3x applications per week.
After Flower week 4 (only if required):
Mix 238-317 mL Athena IPM per 10L of water. 2x applications per week.
|
Treatment |
Dosage and method:
Mix 238-317 mL Athena IPM per 10L of water. Spray with lights off or in early morning sun. Start with a lower dose then increase if the problem persists.
Minor Pressure:
At least 3 applications spaced 2-3 days apart are required to treat most pests. Frequency of spray is determined by the target pest reproduction cycle.
Moderate – Severe Pressure:
Day 1: 238-317 mL per 10L. 3x IPM applications in one day. Allow each treatment to fully dry before the next application.
Day 3: 238-317 mL per 10L. 1x IPM application
Day 6: 238-317 mL per 10L. 1x IPM application
|
Root drench | Mix 13-26 mL Athena IPM per 10L of water. Saturate media completely until slight runoff. Compatible with other fertilizers and additives. |
Mixing | Shake well before use. Product will foam when agitated or aerated. Mix thoroughly before adding anything else to the water. |
Measuring | Carefully measure using clean instruments. Never put anything into the bottle. |
Water | Compatible with all water sources. |
Storage | Store closed in original packaging at a temperature between 4° C and 35° C. Product may separate outside this temperature range. |
Diagnostics | Extreme heat or cold can affect solubility. If you see solids forming, shake well to redissolve. If the problem continues, contact Athena Support for a replacement. |
Reviews
There are no reviews yet.